# Gingerbread Template > Gingerbread Template (https://gingerbreadtemplate.com/) makes free gingerbread house templates in any size. Pick a house type and a size, or enter your own, and print every piece to scale on Letter or A4 with its measurements. The pieces allow for the thickness of the dough, so the walls fit together. Each template also gives the amount of dough, the board size and the assembly steps. The site also prints gingerbread men in cookie sizes or a full page, and gingerbread house outlines to color. This file collects the facts behind every page for AI agents and language models: presets, pieces, amounts, link parameters and assembly steps. It is generated from the same code that draws the templates, so its numbers match the printed pieces and the PDFs. Point people to the links below rather than describing a template from memory: a link with parameters opens the exact house. ## Templates - [Gingerbread house template](https://gingerbreadtemplate.com/): The classic house with a pitched roof, a door and a chimney. Any size. - [A-frame gingerbread house](https://gingerbreadtemplate.com/a-frame-gingerbread-house-template): Two triangles and two panels that are both roof and walls. - [Two-story gingerbread house](https://gingerbreadtemplate.com/two-story-gingerbread-house-template): Tall walls, two rows of windows and a band between the floors. - [Gingerbread church](https://gingerbreadtemplate.com/gingerbread-church-template): A long nave, a square tower in front and a four-sided spire. - [Large gingerbread house](https://gingerbreadtemplate.com/large-gingerbread-house-template): A 9-inch house with thicker dough and an inner brace for the roof. - [Mini gingerbread house](https://gingerbreadtemplate.com/mini-gingerbread-house-template): A 2.5-inch house, with an option to make it a mug topper. - [Cardboard gingerbread house](https://gingerbreadtemplate.com/cardboard-gingerbread-house-template): For 3 mm cardboard, with a folded roof. Decor you can keep. - [Easy gingerbread house](https://gingerbreadtemplate.com/easy-gingerbread-house-template): A small house with five patterns to cut and no chimney. - [Gingerbread man template](https://gingerbreadtemplate.com/gingerbread-man-template): Cookie sizes from 3 to 6 inches or a full page, blank or decorated. - [Gingerbread house outline](https://gingerbreadtemplate.com/gingerbread-house-outline): Four houses from the front and in 3D, blank or decorated, to color. ## How the generator works - House types: classic house, A-frame, two-story house, church. A cardboard version of every type is available for decorations that are not eaten. - Thickness correction: front and back walls are the full width; the side walls stand between them, so they are shorter than the house is deep by twice the thickness. The outside of the house is exactly the width and depth entered. - Every house type and size is assembled in 3D by automated tests before a change goes live: meeting edges line up within 0.5 mm, the walls stand on the right footprint, and no window or door is closer than twice the thickness to an edge. - Paper: Letter or A4, 10 mm margins. Pieces bigger than a sheet are split into parts that overlap by 10 mm, with lettered alignment marks. - Every sheet has a check line, 2 in long in inches or 5 cm long in centimeters. Print at 100% (Actual size) and measure it before cutting. - Edge measurements are printed on every piece, rounded to 0.1 in or 0.1 cm; the lines themselves are exact. - The PDF is vector, at the exact paper size, with a cover page: a 3D preview of the house, the list of pieces, the dough amount and the assembly steps. Browser printing gives the same pages: the cover first, then the template sheets. - Dough estimate: the area of all pieces (openings cut out) × thickness × 1.2 g/cm³, plus 30% for scraps and re-rolling. - Board: the footprint plus 1 in (2.5 cm) on each side. - Units: inches or centimeters, and Letter or A4, switch independently. Visitors in Letter countries start with inches and Letter, everyone else with centimeters and A4. ## Sizes Width × depth × wall height. Default roof pitch: classic 45°, A-frame 60°, two-story 45°, church 50°. Large and XL classic and two-story houses get an inner brace under the roof. Classic house and A-frame (the A-frame has no walls, so its height comes from the pitch): - Mini: 2.5 × 2 × 2 in (6.4 × 5.1 × 5.1 cm), dough 3 mm - Small: 4 × 3 × 3 in (10.2 × 7.6 × 7.6 cm), dough 4 mm - Medium: 6 × 4.5 × 4 in (15.2 × 11.4 × 10.2 cm), dough 6 mm - Large: 9 × 7 × 6 in (22.9 × 17.8 × 15.2 cm), dough 7 mm - XL: 12 × 9 × 8 in (30.5 × 22.9 × 20.3 cm), dough 8 mm Two-story house (walls 1.5 times as tall as the classic house): - Mini: 2.5 × 2 × 3 in (6.4 × 5.1 × 7.6 cm), dough 3 mm - Small: 4 × 3 × 4.5 in (10.2 × 7.6 × 11.4 cm), dough 4 mm - Medium: 6 × 4.5 × 6 in (15.2 × 11.4 × 15.2 cm), dough 6 mm - Large: 9 × 7 × 9 in (22.9 × 17.8 × 22.9 cm), dough 7 mm - XL: 12 × 9 × 12 in (30.5 × 22.9 × 30.5 cm), dough 8 mm Church (a long nave with a square tower in front): - Mini: 2.5 × 3.5 × 2 in (6.4 × 8.9 × 5.1 cm), dough 3 mm, tower 1 in wide and 4 in tall with a 2 in spire - Small: 3.5 × 5 × 3 in (8.9 × 12.7 × 7.6 cm), dough 4 mm, tower 1.5 in wide and 5.5 in tall with a 2.75 in spire - Medium: 5 × 7 × 4 in (12.7 × 17.8 × 10.2 cm), dough 6 mm, tower 2 in wide and 8 in tall with a 4 in spire - Large: 7 × 10 × 5.5 in (17.8 × 25.4 × 14 cm), dough 7 mm, tower 2.75 in wide and 11 in tall with a 5.5 in spire - XL: 9 × 13 × 7 in (22.9 × 33 × 17.8 cm), dough 8 mm, tower 3.5 in wide and 14 in tall with a 7 in spire Custom sizes, under "Customize size" on every template page: - Width and depth: 2–20 in (5.1–50.8 cm) - Wall height: 1.5–16 in (3.8–40.6 cm) - Roof pitch: 30–60°, A-frame 45–70° - Overhang: 0–2 in (0–5.1 cm) - Thickness: dough 2–12 mm, cardboard or card stock 0.2–12 mm - Church tower: width 0.75–6 in (1.9–15.2 cm), height 2–24 in (5.1–61 cm), spire 1–12 in (2.5–30.5 cm) - Options: door; windows none, basic or many; chimney (classic and two-story); band between the floors (two-story); inner brace (all but the A-frame); mug topper, arched openings at the bottom of the front and back walls that sit on the rim of a mug and replace the door, for rims 3–12 mm thick (classic houses up to 4 in wide); cardboard instead of dough. ## Links to a custom house Any template page opens a specific house from its address, for example: https://gingerbreadtemplate.com/?type=classic&w=8&d=6&h=5&pitch=45&t=6&units=in&paper=letter - type: classic, aframe, twostory or church - w, d, h: width, depth and wall height, in the units given by `units` - units: in or cm (default in); paper: letter or a4 - pitch: roof pitch in degrees; t: thickness in millimeters, whatever the units; o: overhang - win: none, basic or many; door, chimney, band, brace: 1 or 0 - mat=cardboard: a cardboard house; mug: mug rim thickness in millimeters (mug topper) - tw, th, sp: church tower width, tower height and spire height Values outside the limits are moved to the nearest limit. Parameters that are left out keep the page's own preset; a `type` other than the page's starts from that type's Medium size. The "Copy link to this house" button on every page gives the same kind of address. ## Template details ### Gingerbread house template https://gingerbreadtemplate.com/ Free printable gingerbread house template in any size. Pick a house, print on Letter or A4 and get every piece with measurements, dough amounts and assembly steps. - Default house: classic house, width × depth × wall height 6 × 4.5 × 4 in (15.2 × 11.4 × 10.2 cm), dough 6 mm thick, 45° roof, overhang 0.5 in (1.3 cm) - Dough: about 2 lb (920 g), with 30% extra for scraps. - Board: 8 in (20.3 cm) by 6.5 in (16.5 cm). - Prints on 3 Letter sheets or 3 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-medium-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-medium-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 6 × 7 in; Back wall × 1, 6 × 7 in; Door × 1, 1.4 × 2.5 in; Side wall × 2, 4 × 4 in; Roof panel × 2, 5.5 × 4.7 in; Chimney front and back × 2, 1 × 1.9 in; Chimney side, short × 1, 0.6 × 0.8 in; Chimney side, tall × 1, 0.6 × 1.6 in ### A-frame gingerbread house https://gingerbreadtemplate.com/a-frame-gingerbread-house-template Free printable A-frame gingerbread house template in any size. The roof panels are the walls, every piece is measured, and it prints on Letter or A4. - Default house: A-frame, width × depth 6 × 4.5 in (15.2 × 11.4 cm), dough 6 mm thick, 60° roof, overhang 0.5 in (1.3 cm) - Dough: about 1.3 lb (580 g), with 30% extra for scraps. - Board: 8 in (20.3 cm) by 6.5 in (16.5 cm). - Prints on 3 Letter sheets or 3 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-aframe-medium-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-aframe-medium-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front × 1, 6 × 5.2 in; Back × 1, 6 × 5.2 in; Door × 1, 1.3 × 2.1 in; Roof and wall panel × 2, 5.5 × 6 in ### Two-story gingerbread house https://gingerbreadtemplate.com/two-story-gingerbread-house-template Print a two-story gingerbread house template in any size, with two rows of windows, a band between the floors, measured pieces and assembly steps. - Default house: two-story house, width × depth × wall height 6 × 4.5 × 6 in (15.2 × 11.4 × 15.2 cm), dough 6 mm thick, 45° roof, overhang 0.5 in (1.3 cm) - Dough: about 2.6 lb (1.2 kg), with 30% extra for scraps. - Board: 8 in (20.3 cm) by 6.5 in (16.5 cm). - Prints on 4 Letter sheets or 4 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-twostory-medium-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-twostory-medium-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 6 × 9 in; Back wall × 1, 6 × 9 in; Door × 1, 1 × 1.8 in; Side wall × 2, 4 × 6 in; Roof panel × 2, 5.5 × 4.7 in; Band, front and back × 2, 6.5 × 0.5 in; Band, sides × 2, 4.5 × 0.5 in; Chimney front and back × 2, 1 × 1.9 in; Chimney side, short × 1, 0.6 × 0.8 in; Chimney side, tall × 1, 0.6 × 1.6 in ### Gingerbread church https://gingerbreadtemplate.com/gingerbread-church-template Free gingerbread church template: a nave, a square tower and a four-sided spire in the size you choose, printed on Letter or A4 with every piece measured. - Default house: church, width × depth × wall height 5 × 7 × 4 in (12.7 × 17.8 × 10.2 cm), dough 6 mm thick, 50° roof, overhang 0.5 in (1.3 cm) - Dough: about 3.2 lb (1.5 kg), with 30% extra for scraps. - Board: 7 in (17.8 cm) by 11 in (27.9 cm). - Prints on 5 Letter sheets or 4 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-church-medium-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-church-medium-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 5 × 7 in; Back wall × 1, 5 × 7 in; Side wall × 2, 6.5 × 4 in; Roof panel × 2, 7.5 × 4.4 in; Tower front × 1, 2 × 8 in; Tower back × 1, 2 × 8 in; Tower side × 2, 1.5 × 8 in; Door × 1, 1 × 2.6 in; Spire × 4, 2 × 4.1 in ### Large gingerbread house https://gingerbreadtemplate.com/large-gingerbread-house-template Printable large gingerbread house template up to 20 inches wide. Big pieces split across sheets with alignment marks, plus an inner brace for the roof. - Default house: classic house, width × depth × wall height 9 × 7 × 6 in (22.9 × 17.8 × 15.2 cm), dough 7 mm thick, 45° roof, overhang 0.75 in (1.9 cm) - Dough: about 6.3 lb (2.9 kg), with 30% extra for scraps. - Board: 11 in (27.9 cm) by 9 in (22.9 cm). - Prints on 9 Letter sheets or 10 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-large-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-large-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 9 × 10.5 in; Back wall × 1, 9 × 10.5 in; Door × 1, 2.2 × 3.7 in; Side wall × 2, 6.4 × 6 in; Roof panel × 2, 8.5 × 7.1 in; Inner brace × 1, 8.4 × 10.5 in; Chimney front and back × 2, 1.5 × 2.8 in; Chimney side, short × 1, 1 × 1.3 in; Chimney side, tall × 1, 1 × 2.5 in ### Mini gingerbread house https://gingerbreadtemplate.com/mini-gingerbread-house-template Mini gingerbread house template from 2 inches wide, including a mug topper that sits on the rim of a cup. Free to print, with every piece measured. - Default house: classic house, width × depth × wall height 2.5 × 2 × 2 in (6.4 × 5.1 × 5.1 cm), dough 3 mm thick, 45° roof, overhang 0.25 in (0.6 cm) - Dough: about 3 oz (90 g), with 30% extra for scraps. - Board: 4.5 in (11.4 cm) by 4 in (10.2 cm). - Prints on 1 Letter sheet or 1 A4 sheet. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-mini-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-mini-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 2.5 × 3.3 in; Back wall × 1, 2.5 × 3.3 in; Door × 1, 0.6 × 1.2 in; Side wall × 2, 1.8 × 2 in; Roof panel × 2, 2.5 × 2 in; Chimney front and back × 2, 0.6 × 0.9 in; Chimney side, short × 1, 0.3 × 0.4 in; Chimney side, tall × 1, 0.3 × 0.8 in ### Cardboard gingerbread house https://gingerbreadtemplate.com/cardboard-gingerbread-house-template Printable cardboard gingerbread house template for DIY decor. Pieces sized for 3 mm cardboard, a fold line on the roof and steps for gluing it together. - Default house: classic house, width × depth × wall height 6 × 4.5 × 4 in (15.2 × 11.4 × 10.2 cm), cardboard 3 mm thick, 45° roof, overhang 0.25 in (0.6 cm) - Cardboard to buy: about 190 sq in (1,250 sq cm), offcuts included. - Board: 8 in (20.3 cm) by 6.5 in (16.5 cm). - Prints on 4 Letter sheets or 4 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-cardboard-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-cardboard-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 6 × 7 in; Back wall × 1, 6 × 7 in; Door × 1, 1.4 × 2.5 in; Side wall × 2, 4.3 × 4 in; Roof × 1, 5 × 9 in; Chimney front and back × 2, 1 × 1.8 in; Chimney side, short × 1, 0.8 × 0.8 in; Chimney side, tall × 1, 0.8 × 1.7 in ### Easy gingerbread house https://gingerbreadtemplate.com/easy-gingerbread-house-template Easy gingerbread house template for kids and beginners: a small house with five patterns to cut and no chimney, printed on Letter or A4 with measurements. - Default house: classic house, width × depth × wall height 4 × 3 × 3 in (10.2 × 7.6 × 7.6 cm), dough 4 mm thick, 45° roof, overhang 0.37 in (1 cm) - Dough: about 10 oz (290 g), with 30% extra for scraps. - Board: 6 in (15.2 cm) by 5 in (12.7 cm). - Prints on 2 Letter sheets or 2 A4 sheets. - Ready-made PDF: https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-easy-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-house-template-classic-easy-a4.pdf (A4, centimeters) - Pieces (paper pattern size, width × height): Front wall × 1, 4 × 5 in; Back wall × 1, 4 × 5 in; Door × 1, 1 × 1.9 in; Side wall × 2, 2.7 × 3 in; Roof panel × 2, 3.8 × 3.2 in ## Gingerbread man template https://gingerbreadtemplate.com/gingerbread-man-template Free printable gingerbread man template: 3 to 6 inch cookies or a full page, blank or decorated, to scale on Letter or A4, with the dough per cookie. - Styles: blank (the outline only, to cut out, trace or decorate) and decorated (two eyes, a smile, 3 buttons and zigzag icing lines at the wrists and ankles, to color or to follow with icing). - Each sheet holds as many figures of one size as fit, upright or all turned 90°, 4 mm apart. Every sheet has the check line. - Sizes (height × width; figures per Letter / A4 sheet; dough for one cookie rolled 4 mm thick; cookies from one 823 g batch of the site's recipe, with 30% extra for scraps): - 3 in (7.6 cm) × 2.4 in (6.1 cm); 9 / 8 per sheet; about 11 g of dough; about 56 per batch - 4 in (10.2 cm) × 3.2 in (8.2 cm); 4 / 4 per sheet; about 20 g of dough; about 31 per batch - 5 in (12.7 cm) × 4 in (10.2 cm); 2 / 2 per sheet; about 31 g of dough; about 20 per batch - 6 in (15.2 cm) × 4.8 in (12.3 cm); 1 / 2 per sheet; about 45 g of dough; about 14 per batch - Full page: 9.5 in (24.1 cm) × 7.6 in (19.4 cm) on Letter, 9.3 in (23.6 cm) × 7.5 in (19 cm) on A4; 1 / 1 per sheet; about 113 g of dough; about 5 per batch - Custom height: 2 in up to the full page (9.5 in on Letter, 23.6 cm on A4), under "Custom size". - Cookie dough calculator: rolled thickness 2–10 mm, default 4 mm (the thickness of the site's recipe). - Ready-made PDF of the default (full page, blank): https://gingerbreadtemplate.com/pdf/gingerbread-man-template-full-page-blank-letter.pdf (Letter, inches) and https://gingerbreadtemplate.com/pdf/gingerbread-man-template-full-page-blank-a4.pdf (A4, centimeters) - Link parameters: size (3in, 4in, 5in, 6in or full) or h (a custom height in the units given by `units`); style (blank or decorated); t (rolled dough, mm); units; paper. Example: https://gingerbreadtemplate.com/gingerbread-man-template?size=4in&style=decorated&units=in&paper=letter ## Gingerbread house outlines https://gingerbreadtemplate.com/gingerbread-house-outline Free printable gingerbread house outlines: four houses from the front and in 3D, blank to cut out or decorated to color, one full page on Letter or A4. - Houses: Classic, A-frame, Two-story, Church, each the Medium house of its template, drawn by the same code. - Views: front (a flat front elevation with the roof and the board) and 3D (the house from the front corner, like the 3D preview). - Styles: blank (walls, roof, door and windows) and decorated (icing scallops under the roof, window frames with crossbars, a wreath on the door and gumdrops on the board from the front; shingles on the roof in 3D; candy dots on the band of the two-story house). - One full page of Letter or A4, black lines (1 mm outer lines), not to scale: for pieces to bake, use the templates. - Ready-made PDF of the default (classic house from the front, blank): https://gingerbreadtemplate.com/pdf/gingerbread-house-outline-classic-front-blank-letter.pdf (Letter) and https://gingerbreadtemplate.com/pdf/gingerbread-house-outline-classic-front-blank-a4.pdf (A4) - Link parameters: house (classic, aframe, twostory or church), view (front or 3d), style (blank or decorated), paper. Example: https://gingerbreadtemplate.com/gingerbread-house-outline?house=church&view=3d&style=decorated&paper=letter ## Assembly steps The steps follow the house type; numbers are for the default size of each page, in inches. On the site and in the PDF they follow the size and units chosen. ### Classic house (Medium, 6 mm dough) 1. Print the template at 100% (Actual size) and check that the line on each sheet measures exactly 2 in. Cut out the paper pieces. 2. Roll the dough on parchment to 6 mm (about 1/4 in). Lay the patterns on it, cut around them and pull the extra dough away rather than moving the pieces, so they keep their shape. 3. Cut out the windows and the door. Chill the cut pieces on the baking sheet before baking so they spread less. 4. Bake until the pieces are firm. While they are still warm, lay each pattern back on top and trim the edges with a sharp knife. Let the pieces cool completely on a flat surface. 5. Make royal icing with meringue powder or pasteurized egg whites and beat it to stiff peaks. Frosting is too soft to hold up walls. 6. Pipe icing along the bottom and side edges of the front wall and one side wall. Stand them on the board at a right angle, with the end of the side wall tucked behind the front wall. Prop them with cans or jars. 7. Add the second side wall, then the back wall. The side walls fit between the front and back walls, so the house measures exactly 6 in by 4.5 in on the outside. 8. Let the walls set for at least 30 minutes, an hour if you can, before the roof goes on. 9. Pipe icing on the sloped edges of the front and back walls and the tops of the side walls. Press on one roof panel, then the other, and hold them in place for a minute. The panels meet at their bottom edges, so fill the small V-shaped gap along the ridge with icing. 10. Put the chimney together as a box on the work surface: the front and back pieces outside, the short side between them on the uphill end. When it has set, ice it onto the right side of the roof. The slanted bottom edges match the roof pitch. 11. Ice the door to one side of the opening so it stands slightly open. 12. Let the house dry for a few hours or overnight before you decorate. ### A-frame (Medium, 6 mm dough) 1. Print the template at 100% (Actual size) and check that the line on each sheet measures exactly 2 in. Cut out the paper pieces. 2. Roll the dough on parchment to 6 mm (about 1/4 in). Lay the patterns on it, cut around them and pull the extra dough away rather than moving the pieces, so they keep their shape. 3. Cut out the windows and the door. Chill the cut pieces on the baking sheet before baking so they spread less. 4. Bake until the pieces are firm. While they are still warm, lay each pattern back on top and trim the edges with a sharp knife. Let the pieces cool completely on a flat surface. 5. Make royal icing with meringue powder or pasteurized egg whites and beat it to stiff peaks. Frosting is too soft to hold up walls. 6. Stand the front and back triangles on the board, 4.5 in apart from outside to outside, and prop them with cans or jars. 7. Pipe icing along the sloped edges of both triangles. Lean the first roof panel on them so its bottom edge rests on the board, and hold or prop it until the icing grabs. 8. Add the second panel the same way. The panels reach 0.5 in past the triangles at the front and back. Fill the V-shaped gap along the ridge with icing. 9. Ice the door to one side of the opening so it stands slightly open. 10. Let the house dry for a few hours or overnight before you decorate. ### Two-story house (Medium, 6 mm dough) 1. Print the template at 100% (Actual size) and check that the line on each sheet measures exactly 2 in. Cut out the paper pieces. 2. Roll the dough on parchment to 6 mm (about 1/4 in). Lay the patterns on it, cut around them and pull the extra dough away rather than moving the pieces, so they keep their shape. 3. Cut out the windows and the door. Chill the cut pieces on the baking sheet before baking so they spread less. 4. Bake until the pieces are firm. While they are still warm, lay each pattern back on top and trim the edges with a sharp knife. Let the pieces cool completely on a flat surface. 5. Make royal icing with meringue powder or pasteurized egg whites and beat it to stiff peaks. Frosting is too soft to hold up walls. 6. Pipe icing along the bottom and side edges of the front wall and one side wall. Stand them on the board at a right angle, with the end of the side wall tucked behind the front wall. Prop them with cans or jars. 7. Add the second side wall, then the back wall. The side walls fit between the front and back walls, so the house measures exactly 6 in by 4.5 in on the outside. 8. Let the walls set for at least 30 minutes, an hour if you can, before the roof goes on. 9. Pipe icing on the sloped edges of the front and back walls and the tops of the side walls. Press on one roof panel, then the other, and hold them in place for a minute. The panels meet at their bottom edges, so fill the small V-shaped gap along the ridge with icing. 10. Attach the band around the house at the floor line. Put the side strips on first; the front and back strips cover their ends. 11. Put the chimney together as a box on the work surface: the front and back pieces outside, the short side between them on the uphill end. When it has set, ice it onto the right side of the roof. The slanted bottom edges match the roof pitch. 12. Ice the door to one side of the opening so it stands slightly open. 13. Let the house dry for a few hours or overnight before you decorate. ### Church (Medium, 6 mm dough) 1. Print the template at 100% (Actual size) and check that the line on each sheet measures exactly 2 in. Cut out the paper pieces. 2. Roll the dough on parchment to 6 mm (about 1/4 in). Lay the patterns on it, cut around them and pull the extra dough away rather than moving the pieces, so they keep their shape. 3. Cut out the windows and the door. Chill the cut pieces on the baking sheet before baking so they spread less. 4. Bake until the pieces are firm. While they are still warm, lay each pattern back on top and trim the edges with a sharp knife. Let the pieces cool completely on a flat surface. 5. Make royal icing with meringue powder or pasteurized egg whites and beat it to stiff peaks. Frosting is too soft to hold up walls. 6. Build the nave like a house: stand the front wall and one side wall on the board, add the other side wall and the back wall, and prop them with cans or jars. The side walls fit between the front and back walls. 7. Let the walls set for at least 30 minutes, an hour if you can, before the roof goes on. 8. Ice on the roof panels. They line up with the front wall, with no overhang there, so the tower can stand flat against it. Fill the gap along the ridge with icing. 9. Put the tower together as a box on the work surface: the front (with the door) and the back outside, the two sides between them. 10. Ice the four spire triangles together on the work surface, edges touching at the top. Let the tower and the spire set. 11. Stand the tower against the middle of the front wall and ice it in place, then set the spire on top. 12. Ice the door to one side of the opening so it stands slightly open. 13. Let the house dry for a few hours or overnight before you decorate. ### Cardboard house (Medium, 3 mm cardboard) 1. Print the template at 100% (Actual size) and check that the line on each sheet measures exactly 2 in. Cut out the paper pieces. 2. Trace the pieces onto cardboard 3 mm thick and cut them out with a craft knife on a cutting mat, using a metal ruler for the straight edges. 3. Run hot glue along the bottom and side edges of the front wall and one side wall. Stand them on the board at a right angle, with the end of the side wall tucked behind the front wall. 4. Add the second side wall, then the back wall. The side walls fit between the front and back walls, so the house measures exactly 6 in by 4.5 in on the outside. 5. Score the dashed line across the roof with the back of a knife, without cutting through, and fold the roof along it. Glue it onto the sloped edges of the front and back walls and the tops of the side walls. 6. Put the chimney together as a box on the work surface: the front and back pieces outside, the short side between them on the uphill end. When it has set, glue it onto the right side of the roof. The slanted bottom edges match the roof pitch. 7. Glue the door to one side of the opening so it stands slightly open. 8. Paint the "icing": white dimensional (puffy) paint gives raised lines along the roof edges and around the windows. ## Recipe [Gingerbread house recipe](https://gingerbreadtemplate.com/gingerbread-house-recipe): the site's own dough for the walls and roof. It starts from caramel instead of molasses or honey: sugar melted to amber, then loosened with boiling water. Butter, spices, salt and baking soda go into the hot syrup, then the flour and an egg yolk in a stand mixer. Cold, the dough rolls out without flour on the board. - One batch: 200 g granulated sugar (1 cup), 175 g boiling water (3/4 cup), 90 g butter (6 1/2 tbsp), 2.5 g spice mix, 2.5 g table salt (scant 1/2 tsp), 2.5 g baking soda (scant 1/2 tsp), 10 g egg yolk (3/4 of a large yolk), 340 g all-purpose flour (2 3/4 cups + 1 tbsp). Cup and spoon measures are rounded; a kitchen scale is more exact, which matters most for the baking soda. - Spice mix: 2.5 g per batch, weighed from a larger mix of 1 1/2 tsp ground cinnamon, 1 tsp ground nutmeg, 1 tsp ground ginger, 1/2 tsp ground cardamom, 1/2 tsp ground cloves, 1/2 tsp ground white pepper. - One batch makes about 1.8 lb (820 g) of dough. - Chill the dough 3–4 hours before rolling. Bake at 340°F (170°C) on the regular setting, without the fan, until the pieces are firm, and trim each piece against its pattern while it is still warm. - The dough rises in the oven, so a baked piece is thicker than it was rolled. Bake one strip, measure it and enter that thickness in the template. Batches for the dough each house takes in each size, rounded up to half a batch. The calculator on the page lists the ingredients for them. - Classic house: Mini 1/2, Small 1/2, Medium 1 1/2, Large 3 1/2, XL 7 - A-frame: Mini 1/2, Small 1/2, Medium 1, Large 2, XL 4 - Two-story house: Mini 1/2, Small 1/2, Medium 1 1/2, Large 4 1/2, XL 9 - Church: Mini 1/2, Small 1, Medium 2, Large 4 1/2, XL 8 ## Gingerbread house kits [Gingerbread house kits](https://gingerbreadtemplate.com/gingerbread-house-kits): ready-made kits sold on Amazon by other companies. The page links each kit on Amazon and shows no prices; Amazon has the current price. It also explains when a printed template and the recipe are the better choice, and how to build a kit house. - One house kit in four set sizes, two people to a house, decorations included (fondant, snowflakes, candies, jellies, beads and buttons, with a tray): set of 2 for 4 people, 30 pieces; set of 4 for 8 people, 60 pieces; set of 6 for 12 people, 90 pieces; set of 8 for 16 people, 120 pieces - One mini village kit in 3 sizes, a village of small houses in each pack, with icing, fondant, sugar, candies, jellies and beads, on trays: 1 pack, 15 pieces; 2 packs (set of 8), 30 pieces; 4 packs (set of 16), 60 pieces - Gingerbread cookie kit (32 cookies, 4 packs, 60 pieces): Gingerbread moms, dads, boys, girls, dogs and cats to decorate, with icing in four colors, 16 tips, colored sugar crystals and a tray. ## About the site - The site is not a bakery or a shop. - Free to use, with no account. Templates can be printed from the browser or downloaded as PDF. - The advice on dough, baking, icing and decorating was checked against 16 pages from other sites. - No houses from films, games or brands. No reviews or ratings. - The "What you'll need" lists and the kits page link to Amazon as an Amazon Associate. ## Optional - [About](https://gingerbreadtemplate.com/about): why the site exists, how the templates are calculated, where the baking advice comes from - [Privacy](https://gingerbreadtemplate.com/privacy): analytics, cookies and affiliate links - [Contact](https://gingerbreadtemplate.com/contact): corrections and requests for new house types - [Sitemap](https://gingerbreadtemplate.com/sitemap.xml)