Skip to content
Gingerbread Template: home

Gingerbread Man Template

Print gingerbread men in cookie sizes from 3 to 6 in tall, or one big figure that fills the page. Choose a blank outline to cut or trace, or a decorated one with a face, buttons and icing lines to color.

Style
Size
Save to Pinterest (opens in a new tab)

Baked gingerbread man cookie, cut with this template

Units:
Paper:

Print at 100% (Actual size). The check line should measure exactly 2 in.

Custom size
in

From 2 to 9.5 in on this paper. The width follows the height.

mm

Each cookie takes about 4 oz (113 g) of dough. One batch of our gingerbread recipe makes about 5 cookies this size.

PDF

Gingerbread man sizes

Each size is the height of the figure from the top of the head to the feet, and the arms set the width. The sheet holds as many figures as fit: 9 at 3 in on Letter paper, one at the full page. Under Custom size you can enter any height from 2 in up to the full page.

Gingerbread man sizes: height, width, figures on one sheet, and dough for one cookie rolled 4 mm thick
HeightWidthPer sheetDough
3 in2.4 in90.4 oz
4 in3.2 in40.7 oz
5 in4 in21.1 oz
6 in4.8 in11.6 oz
Full page 9.5 in7.6 in14 oz
Figures per sheet of Letter paper; dough for one cookie rolled 4 mm thick.

The full page is the largest figure that fits inside the 10 mm margins: 9.5 in tall on Letter and 9.3 in on A4.

How to cut gingerbread men without a cookie cutter

  1. Pick a size and print at 100% (Actual size). The line at the bottom of the sheet should measure exactly 2 in. If it is shorter, the printer shrank the page.
  2. Cut out one figure. Paper is enough for a few cookies. For a whole batch, trace it onto card stock or a cereal box, which stays flat on the dough.
  3. Roll the dough to an even thickness. Our gingerbread recipe rolls it 4 mm thick.
  4. Lay the template on the dough and cut around it with a small, sharp knife. Cut the figures close together to waste less dough.
  5. Bake at 340°F (170°C) for 9 to 12 minutes, until the cookies are still slightly soft to the touch. These are the times for our recipe; follow your own recipe if you use another dough.

How much dough for gingerbread men

The calculator under the template works it out for the size you choose. The area of one figure times the rolled thickness gives the dough for one cookie, and 30% more covers the dough left between the figures.

Roll gingerbread men 1/8 to 1/4 inch (3 to 6 mm) thick. Thinner cookies bake crisper; a little thicker gives them some chew. Our recipe rolls the dough 4 mm thick, and one batch makes about 31 cookies 4 in tall or 56 at 3 in.

Blank and decorated gingerbread men for crafts

The blank template is the outline alone. Trace it onto brown card stock or felt, or hand children the sheet and a pair of scissors: at 3 in one sheet holds 9 figures.

The decorated template adds two eyes, a smile, three buttons and zigzag icing at the wrists and ankles. Print it full page for coloring, or keep it next to the baked cookies as a guide for the icing. On a cookie, sketch the lines with an edible marker first, then pipe over them.

Gingerbread men for a gingerbread house

The 3 in size is as tall as the walls of a Small house (3 in), the size of the easy gingerbread house. For a figure that stands at the door of the Medium gingerbread house template, enter a height under its door, which is 2.5 in tall.

To color instead of bake, the gingerbread house outlines draw the same houses in black lines.

FAQ

How do I print the gingerbread man template at the right size?

Choose a size, or enter your own height under Custom size, and print at 100% (Actual size). The check line on the sheet should measure exactly 2 in. If it does not, the printer scaled the page to fit.

How big is the full-page gingerbread man?

9.5 in tall and 7.6 in wide on Letter paper, 9.3 in by 7.5 in on A4. That is the largest figure that fits on one sheet; the template does not split a figure across sheets.

How thick should I roll gingerbread men?

Between 1/8 and 1/4 inch (3 to 6 mm). Thinner cookies bake crisper, and a little thicker gives them some chew. Our recipe rolls the dough 4 mm thick.

How many gingerbread men does one batch of dough make?

One batch of our gingerbread recipe makes about 31 cookies 4 in tall, rolled 4 mm thick. Change the size or the thickness in the calculator to count other sizes.

Can I use the template instead of a cookie cutter?

Yes. Cut the figure out of card stock, lay it on the rolled dough and cut around it with a small, sharp knife. It also gives you sizes a cutter set does not have, from 2 in to the full page.

Is the decorated template for coloring or for icing?

Both. Children can color it, and bakers can follow its lines with icing. Sketch the design on the baked cookie with an edible marker first, then pipe over it.